Take VR streaming to the next level with Radeon™ ReLive for VR! Supporting select* Radeon™ VR Ready Premium graphics cards, Radeon™ ReLive VR app enables high quality wireless PC VR gaming on your standalone Daydream headset.
GET STARTED QUICKLY
Simply launch SteamVR™, connect via the Radeon™ ReLive VR app & open a game to start playing.
FEATURES
- Radeon™ ReLive streaming pipeline built specifically for low latency VR
- Wireless VR made possible through positional tracking of HTC Vive Focus and Radeon™ GPU headset optimizations
- Easily start gaming with third party Bluetooth controller compatibility**
- Stream at an immersive 1440x1440p resolution
INSTRUCTIONS
- Steam and SteamVR need to be installed in your PC
- Make sure your PC is connected to a 5GHz (802.11ac) router or a wireless access point with an Ethernet cable (Cat-5e or Cat-6 recommended)
- Enable Remote Play in the Radeon™ Settings -> ReLive -> Game & VR Streaming tab and then flip the SteamVR Integration switch to Enabled to enable Radeon™ Relive VR.
- Allow incoming network traffic on Windows Firewall, if prompted.
- Run SteamVR on your PC.
- Install the Relive VR app on your Daydream device
- Make sure your Daydream device is connected to the same router/AP as your PC running SteamVR. Use the 5GHz SSID (usually has “5G” or “5GHz” or “AC” in its name for most routers) – note that 2.4GHz networks (802.11n or earlier) are not recommended for a good wireless VR experience.
- Run the Relive VR app. It will find your PC running SteamVR and connect to it automatically.
Compatible with AMD Radeon™ RX 470, RX 570, RX 480, RX 580, RX 590 & RX Vega series products & supports Windows® 10. Recommended experience on Radeon™ RX Vega series graphics cards. Controllers must be compatible with selected game and headset, please consult vendor for compatibility information.
**PC game compatibility depends on headset capability. Please see www.AMD.com/ReLive
VR के लिए Radeon ™ ReLive के साथ अगले स्तर पर वीआर स्ट्रीमिंग लें! समर्थन का चयन * राडेन ™ वीआर तैयार प्रीमियम ग्राफिक्स कार्ड, राडेन ™ रीलाई लाइव वीआर ऐप आपके स्टैंडअलोन डेड्रीम हेडसेट पर उच्च गुणवत्ता वाले वायरलेस पीसी वीआर गेमिंग को सक्षम बनाता है।
जल्दी शुरू करें
बस स्टीमवीआर ™ लॉन्च करें, राडेन ™ रीलीव वीआर ऐप के माध्यम से कनेक्ट करें और खेलना शुरू करने के लिए एक गेम खोलें।
विशेषताएं
- रेडॉन ™ रीयल लाइव स्ट्रीमिंग पाइपलाइन विशेष रूप से कम विलंबता वीआर के लिए बनाया गया
- वायरलेस वीआर ने एचटीसी विवे फोकस और राडेन ™ जीपीयू हेडसेट अनुकूलन की स्थितिगत ट्रैकिंग के माध्यम से संभव बनाया
- आसानी से तीसरे पक्ष के ब्लूटूथ नियंत्रक संगतता के साथ गेमिंग शुरू करें **
- एक immersive 1440x1440p संकल्प पर स्ट्रीम
निर्देश
- स्टीम और स्टीमवीआर को आपके पीसी में स्थापित करने की आवश्यकता है
- सुनिश्चित करें कि आपका पीसी 5GHz (802.11ac) राउटर या ईथरनेट केबल (बिल्ली -5e या Cat-6 अनुशंसित) के साथ वायरलेस एक्सेस पॉइंट से कनेक्ट है
- राडेन ™ सेटिंग्स में रिमोट प्ले सक्षम करें -> रीयल -> गेम और वीआर स्ट्रीमिंग टैब और फिर Radeon ™ रिलीव वीआर सक्षम करने के लिए सक्षम करने के लिए स्टीमवीआर एकीकरण स्विच को फ्लिप करें।
- अगर संकेत मिले तो विंडोज फ़ायरवॉल पर आने वाले नेटवर्क यातायात की अनुमति दें।
- अपने पीसी पर स्टीमवीआर चलाएं।
- अपने डेड्रीम डिवाइस पर रिलीव वीआर ऐप इंस्टॉल करें
- सुनिश्चित करें कि आपका डेड्रीम डिवाइस उसी राउटर / एपी से जुड़ा हुआ है जैसे आपका पीसी स्टीमवीआर चला रहा है। 5GHz एसएसआईडी का उपयोग करें (आमतौर पर अधिकांश राउटर के लिए इसके नाम पर "5 जी" या "5GHz" या "एसी" होता है) - ध्यान दें कि एक अच्छे वायरलेस वीआर अनुभव के लिए 2.4GHz नेटवर्क (802.11 एन या इससे पहले) की अनुशंसा नहीं की जाती है।
- रिलीव वीआर ऐप चलाएं। यह आपके पीसी को स्टीमवीआर चलाएगा और स्वचालित रूप से उससे कनेक्ट होगा।
एएमडी रेडॉन ™ आरएक्स 470, आरएक्स 570, आरएक्स 480, आरएक्स 580, आरएक्स 5 9 0 और आरएक्स वेगा श्रृंखला उत्पादों के साथ संगत और विंडोज® का समर्थन करता है 10. राडेन ™ आरएक्स वेगा श्रृंखला ग्राफिक्स कार्ड पर अनुशंसित अनुभव। नियंत्रक चयनित गेम और हेडसेट के साथ संगत होना चाहिए, कृपया संगतता जानकारी के लिए विक्रेता से परामर्श लें।
** पीसी गेम संगतता हेडसेट क्षमता पर निर्भर करता है। कृपया www.AMD.com/ReLive देखें